Central Heating accessories from Glow-worm

	Plume Management Kit To resolve the problems that plume can cause when a condensing boiler is running, Glow-worm has created the Plume Management Kit; a clever accessory which allows the plume to be exhausted further away from the duct, reducing the visual impact of the vapour trail. The simple piping kit fits neatly onto the horizontal flue of any Glow-worm high efficiency boiler and can be extended to a maximum of 6m in length, fitting easily round ledges and other obstacles to achieve minimum clearance levels required on installations. • Compatible with all Glow-worm high efficiency boilers • Can be retro-fitted to any existing Ultracom, Flexicom or Ultrapower installation • Additional elbows, bends and 1-meter extensions available • Simple push-fit connection • Available in black or white to compliment rain water fittings

	Condensate Pump To solve problems associated in locating a suitable outlet to drain away condensate from the condensing boiler, Glow-worm have produced a condensate pump that can collect the condensate from the boiler and pump it into the waste system therefore aiding a more flexible installation. Glow-worm’s Condensate Pump is the smallest available in the UK and operates at maximum efficiency with the reservoir pump discharging the condensate in one go when the fill level is reached, rather than as a continuous operation. The Condensate Pump is extremely reliable; in the unlikely event of it becoming too full, the overflow safety switch will automatically shut the connected boiler down and the pump’s LED display will flash red indicating a fault ensuring the pump is completely safe to use. • Smallest condensate pump in the UK • Compatible with all Glow-worm high efficiency boilers • Vertical pump height up to 4m • 6m discharge hose for connecting the pump to the waste water system • Over flow safety switch

	Plume Deflector Kit Compatible with all Glow-worm high efficiency boilers, the Plume Deflector Kit is a useful accessory designed to take the hassle out of flue gas termination by diverting plume left, right or upwards away from problem zones such as adjacent properties or walk ways. Available in black or white, the Plume Deflector Kit can be installed quickly and simply onto a horizontal flue instead of the standard terminal end piece during or after installation.

	Ridge Tile Terminal Accessory Designed for use on all high efficiency boilers, the ridge tile terminal accessory is designed to make the roof finish look neater and less obtrusive. Available in a black enamel finish, the ridge tile accessory can be fitted to purpose designed flue outlet ridge tiles and provides a quick and easy design solution.

	Outdoor Sensor Also available as an optional accessory is the outdoor sensor which adds a further level of intelligence to the system (available with the Ultracom cxi & Ultrapower sxi). Weather Compensation allows the outdoor temperature to be communicated back to the system, adjusting the flow temperature to the radiators to meet demands.

	Smart Wiring Centre This intelligent functionality is automatically enabled in the Ultracom cxi and cx and can be achieved on the Ultracom hxi and sxi with Glow-worm controls by installing a Smart Wiring Centre available from Glow-worm as an accessory in place of the usual 10 way wiring box that would normally be installed.