Glow-worm has developed the new Smart Wiring Centre, which allows Glow-worm Climastat, Climapro, Climapro RF- or weather compensation - to be used with Ultracom and Flexicom system and open vent boilers.

This means that intelligent room control or weather compensation can now be used with the full range of Ultracom and Flexicom boilers.

Intelligent room control is a simple method of controlling the flow temperature of water to the central heating system based on the temperature measured in the room. As the temperature in the room approaches the desired set point, the boiler lowers the flow temperature of water supplied to the central heating system (radiators).

A lower flow temperature means that the boiler operates more efficiently in, or closer to the condensing mode. Energy costs are reduced and a more stable and comfortable room temperature is achieved.

Weather compensation measures the temperature outside the property and adjusts the flow temperature to the radiators accordingly. The colder the exterior temperature, the hotter the flow temperature, and conversely the warmer the outdoor temperature the cooler the flow temperature will be. The effect is that the flow temperature adjusts the output of the radiator to meet the actual heat demand of the property. The lower flow temperature also ensures that the boiler operates more efficiently.

Glow-worm’s Smart Wiring Centre is designed for use in standard ‘S-plan’ system (2-port motorised valves) or ‘Y-plan’ system (3-port motorized valve) instead of a 10-way wiring centre. There are terminals for one heating zone and one hot water zone with the ebus connection for Glow-worm Climapro and Climastat

The Smart Wiring Centre together with Glow-worm controls creates an intelligent heating system, which allows the system to differentiate between a call for heating and a call for hot water. The system then adjusts the boiler flow temperature accordingly and opens the appropriate zone-valve. In this way either the lower flow temperature is circulated around the central heating system, or the higher flow temperature is directed to the hot water cylinder. If there is a demand for both central heating and hot water, the system runs in hot water priority mode as default.

The Glow-worm Smart Wiring Centre is used instead of the Options Board to provide an intelligent system. However, if simple on/off functionality is required, the Options Board is still available.

Benefits of the Smart Wiring Centre

• Room or weather compensation is now possible with Ultracom and Flexicom system and open vent boilers and with Climapro or Climastat controls.

• Lower central heating flow temperatures associated with intelligent control can be achieved.

• Energy costs are reduced as the boiler operates more efficiently at lower flow temperatures

• Improved comfort levels in the home can be achieved with room or weather compensation.

• Simple push-fit colour-coded connectors for simple and error-free wiring

The Smart Wiring Centre is designed for use instead of a standard 10-way wiring centre in standard domestic control systems and has simple push fit, colour-coded connectors for error-free wiring. Cables can be clamped into place once wiring is complete for a tidy installation.

The following connections are provided in the Smart Wiring Centre:-

• 230V power supply.

• Cylinder thermostat relay connection.

• eBus to connect to Glow-worm controls and to the eBus terminals in the boiler.

• Zone valve connections for one hot water zone and one heating zone:

o 2x 2-port valves, OR

o 1x 3-port valve

Readily available as a special order in multiples of five, the 4 meter extension gives instant additional flexibility for boiler positioning when choosing any boiler product from the 80mm twin flue range.

With the major benefit of having to use fewer joints on larger flue runs, the 4 meter extension kit provides easier maintenance and a even quicker annual inspection.

The new introduction is also particularly useful when working towards achieving the requirements of CORGI’s Bulletin No. 200 ‘Room-sealed fan draught flue systems concealed within voids’.

Due to the specialist nature of this particular product and its larger-than-normal dimensions, it will not be stocked at merchants; customers can instead place orders directly with the merchants or with the Glow-worm sales administration team for direct delivery.

All Glow-worm A rated boiler are covered by a 2-years parts and  labour warranty for added peace of mind and are supported by Glow-worm’s extensive after-sales service network of over 200 service engineers providing experienced and dedicated national support.

The impressive range of Glow-worm boilers includes the Ultracom cxi advanced range of high efficiency condensing combination boilers with its simple to use inbuilt digital programmer and highly reliable stainless steel heat exchanger.

Based on fourth generation technology the Ultracom cxi is built with tried and tested components and with a easy installation in mind- the appliance can be installed and commissioned even without removing the case.

Stylish inbuilt back-lit digital controls provide 7-day or 24-hour control of central heating and/or hot water pre-heat function while simple push button controls, and advance functionality mean that it takes seconds to set and alter any programmes making the Ultracom the ideal appliance for any home situation.

If its reliability with simplicity that’s required then Ultracom cx is the range for you; this range of high efficiency condensing combis incorporates a stainless steel heat exchanger along with the option to add a plug-in analogue timer providing simple control of a high performance appliance. 

Both the open vent Ultracom hxi and the sealed system Ultracom sxi, include inbuilt digital controls that can be activated as required by fitting a smart wiring centre within the boiler giving the installer further choice. 

Glow-worm’s Flexicom cx is a compact and flexible range of condensing combis and one of few high efficiency boiler in the UK with a direct rear flue, kitchen cupboards sized fit and a glide-down plug-in timer. 

The glide-down analogue timer provides simple control – one push and the clock glides into position. Set the time and another gentle push hides the clock from view inside the base of the boiler.

The Flexicom hx open vent versions and sealed system versions, the Flexicom sx, are fully compatible with any cylinder in a new or existing system. 

The Betacom c range is the no-nonsense range of SEDBUK B combis from Glow-worm and is the ideal heating solution for a small to medium sized home, providing a simple and reliable supply of heating and hot water. It features an in-built analogue timer, multiple flue options and in-built frost protection. It is fully compatible with the Glow-worm’s Plume Management Kit, Condensate Pump and glow-worm’s range of controls.

Glow-worm system boilers include Ultrapower sxi, advanced system store, is available in two different outputs and designed especially for the larger property. It provides endless hot water on demand with fast reheat times and combi back-up, all within a single appliance that fits in an airing cupboard.

All Glow-worm A rated boiler are covered by a 2-years parts and labour warranty for added peace of mind and are supported by Glow-worm’s extensive after-sales service network of over 200 service engineers providing experienced and dedicated national support.

The 1000 square metres purpose built Centre has all the latest Glow-worm products – the whole of the high efficiency boiler range and the newly introduced solar thermal offering – plus enough working models for groups of 10 to have their own individual unit to train on. The Centre is on Aztec West Business Park which is positioned close to the M4/M5 interchange for ease of access.

This latest opening follows Glow-worm’s stated aim of giving installers a full nationwide training provision with quick and easy access to the latest procedures and techniques.

The Bristol Centre joins Elland (near Leeds), Glasgow, Belper, Norwich, Caerphilly, Fife, St Albans, Exeter and Sittingbourne .

“Our aim is to give every UK installer access to our Training centres which are within an hour or so travelling time. We have steadily committed major amounts of resources – both personnel and financial investment – to Training facilities and courses. We believe it sets a benchmark. The industry and today’s installer needs this from major manufacturers’ such as Glow-worm,” says Michelle Crowder for the company.

“At the Bristol Centre, ‘ says Area Training Manager Dave Fowler, “installers will receive ‘hands-on’ training on the latest high efficiency boilers – the Ultracom, Ultrapower, Flexicom and Clearly Solar ranges. Installers will see just how easy both ranges are to install, commission and service. The Bristol Centre has been specifically designed – like all other Centres – to be a relaxed, informative and informal environment. Not only will an installer learn lots of useful information on the latest product technology, but they also receive a full reference pack, training and technical data sheets,” adds Michelle Crowder.

Glow-worm’s training courses provide an ideal opportunity for installers to get themselves up-to-speed on the company’s expanding range of products - High Efficiency boilers and Clearly Solar plus a host of accessories. Glow-worm excels in terms of both product innovation and installation, commissioning and servicing training.

A sample content of a boiler training course would include a product range overview, specification, installation requirements, flues & accessories, component change and repair, fault finding and commissioning.

“Installers can choose from a whole range of courses – all in plush, comfortable surroundings designed to maximise the impact of the training. We even have catering on site so there no need for any time to be wasted in traffic!” says Dave Fowler.

Designed for use on any new or existing high efficiency Glow-worm appliances, the Plume Deflector fits onto the horizontal flue instead of the standard terminal end piece during or after installation. Once fitted it will divert the plume upwards and away (either right or left) from adjacent properties or walk ways.

It comes either in black or white so it can be matched to rain water fittings or similar external fittings like barge boards or even windows.